![78932.png]](https://hello.gkdtechnologies.com/hs-fs/hubfs/78932.png?height=40&name=78932.png){kind=small}
Error Messages
Find out the meaning of the system error messages, along with potential solutions to the errors.
E1 to E25
- E2 - Boom offset not straight!
- E4 - Axles not locked!
- E5 - Counterweight Mismatch
- E6 - Backwards Stability!
- E8 - Dipper Mismatch!
- E9 - Foreboom Mismatch!
- E10 - Pre-boom mismatch
- E11 - Height Mismatch!
- E12 - Radius Mismatch!
- E13 - Slew Mismatch!
- E14 - Safety Mismatch! / E15 - Mismatched Safety!
- E16 - Safety Board Lost
- E20 - Slew left into limit!
- E21 - Slew Right into Limit!
- E22 - Offset Mismatch!
- E23 - Offset sensor (fore) 0!
- E24 Offset sensor (fore) 1023!
- E25 - Safety Offset sensor (fore) 0!
E26 to E50
- E27 - RS Dual over pressure! / E28 - RS dual pressure mismatch! / E29 - RS Dual pressure over 20mA! /E30 - RS Dual under 4mA! /E31 - RS dual press sensor 0! /E32 - RS dual press sensor 1023!
- E33 RS over pressure! / E34 RS 20mA press sensor over 20mA! / E35 RS press sensor below 4mA! / E35 RS press sensor below 4mA! / E36 RS press sensor 0! / E37 RS dual press sensor 1023!
- E38, E39, E40, E41, E42, E43, E44, E45, E46, E47, E48, E49, E50
E51 to E75
- E56 - Extn reeler out of range!
- E57 - Boom Ang out of range!
- E60 - MOD3 Op 9-16 fault! / E61 - MOD3 Op 1-8 Connection! / E62 - MOD3 Op 9-16 connection! / E63 - MOD3 Op 1-8 connection!
- E65 - MOD1 Op 9-16 fault! / E66 - Mod1 Op 1-8 fault! / E67 - MOD1 Op 9-16 no power! / E68 - Op 9-16 connection! / E69 - MOD1 Op 1-8 no power! / E70 - MOD1 Op 1-8 connection!
- E71 - MOD1 comms!
- E72 - MOD2 comms!
- E73 - MOD3 comms!
- E75 - MOD5 comms!
E76 to E100
- E76 - MOD6 Comms!
- E77 - MOD9 Comms!
- E78 MOD11 Comms!
- E79 MOD13 Comms!
- E82 Safety Offset #8 Errors
- E83 Safety Dipper #7 Errors!
- E84 Safety Fore #6 Errors!
- E85 Safety Stub #5 Errors!
- E86 Offset #4 Errors!
- E87 Dipper #3 Errors!
- E88 Fore #2 Errors!
- E89 Stub #1 Errors!
- E90 Encoder sensor comms!
- E93 Safety dipper #7 comms!!
- E94 Safety fore #6 comms!
- E95 Safety stub #5 comms!
- E97 dipper #3 comms!
- E98 fore #2 comms!
- E99 stub #1 comms!
- E100 Dipper Sensor 3/4 Comms!
E101 to E199
- E101 Fore Sensor Comms!
- E102 Stub Sensor Comms!
- E105 Unlock feedback mismatch!
- E106 PLC comms error x 5
- E107 Under Carriage Comms!
- E109 Undercarriage Dual C/G Mismatch!
- E110 U/C Dual CG safety comms!
- E111 No serial comms!
- E114 - No Safety Comms!
- E116 Trailer Breakaway!
- E117, E118, E119, E120, E121, E122 MOD 2 connection fault / connection
- E123 Date too early!
- E124 Dipper reeler comms!
- E125 Dipper Switch comms!
- E126 Extn switch out of range
- E127 Dipper reeler / switch mismatch!
- E128 Dual Swivel Fault!
- E129 Attachment Press Sensor 1023! E130 Attachment Press Sensor 0! E131 Attachment Low Pressure!
- E130 Attachment Press Sensor 0!
- E131 Attachment Low Pressure!
- E132 Z-Boom invalid inputs!
- E133 Jib reeler out of range!
- E135 Front track twist cant comms error! / E136 Rear track twist cant comms error!
- E136 Rear track twist cant comms error!
- E138 Front track twist mismatch! / E139 Rear track twist mismatch!
- E140 Cant out of range!
- E141 Grad out of range!
- E142 Front track twist cant range! / E143 Rear track twist cant range!
- E144 Speed Control Module Fault!
E200 to E299
- E200 Extending NotExtending!
- E201 Extending Retracting!
- E202 Extended Not Extended!
- E203 Extended Retracted!
- E210 Retracting NotRetracting!
- E211 Retracting Extending!
- E212 Retracted NotRetracted!
- E213 Retracted Extended!
- E220 Stationary Extending!
- E221 Stationary Retracting!
- E222 Stationary Extended!
- E223 Stationary Retracted!
- E233 Ext.Prox Fault1! / E234 Ext.Prox Fault2!
- E235 Ext.Press Fault1!
- E236 Ext.Press Fault2!
- E237 Ret.Press Fault1!
- E238 Ret.Press Fault2!
I1 to I50
- I1 Counter-wt intermediate!
- I2 500kg margin Applied!
- I3 Stub Limit!
- I4 Stabilisers not stowed (drive cut)!
- I5 Engine Off!
- I6 Rail gear switch!
- I7 Bad Rail Gear!
- I8 1 stabiliser leg! Redeploy
- I9 Legs, not adjacent! Redeploy
- I10 Deploying Legs
- I11 Inline to lift legs!
- I13 Emergency Stop!
- I14 Air brakes! (drive cut)
- I15 Menu test tab for screen
- I16 Bad counter-wt switches
- I17 Dipper extended with jib
- I18 Trailer Breakaway!
- I19 Tracks in/out mismatch!
- I20 LOH too high to change Stab duty! / I21 LOH too high to change Rd/Rl duty!
- I22 Attachment over pressure!
- I23 Attachment pressure comms!
- I24 Dipper safety reeler out of range / I25 Jib safety reeler out of range
- I25 Jib safety reeler out of range
- I26 Max track twist exceeded
- I27 Load exceeds max. output slowed
- I28 Max cant exceeded. Output slowed / I29 Max grad exceeded. Output slowed
- I29 Max grad exceeded. Output slowed
Other
Series 2-LHS
- Op Module Comms!
- Slew Module Comms!
- Stub Ang out of range!
- Attachment Low Pressure! Attachment Over Pressure!
- RS Low Pressure! RS Over Pressure!
- FS Low Pressure! FS Over Pressure!
- Swing Boom Sensor D2 #4 Errors!
- Att Jib Sensor 4 Comms!
- Dipper Sensor 3 Comms!
- Artic Sensor 2 Comms!
- Boom Sensor 1 Comms!